IWC Reliable to about 200 meters and characterized by signature Super Compressor traits like an internal rotating bezel, two screw-down crowns, and a utilitarian steel case, the watch planted a firm foundation for the AAA IWC Aquatimer Replica Watches lineage. However, while the piece was unique in its own right, the popularity of the Super Compressor style of watches was slowly by the 1970s.
The most basic version of today’s Aquatimer, has a IWC Replica Swiss Made 42-mm steel case, which sits thick upon the wrist at 14 mm. The watch uses an IWC-developed technology called a Safe Dive system, which explains what appears to be a second crown of the left side of the case, but is actually a part of a larger pinion system that helps integrate the internal and external rotating-bezel system.
Taking a closer look at the black or silver-plated dial, you will notice the internal rotating bezel we discussed before, visible tick marks for the hour indices, and a relatively large IWC Replica Watches toward the 12 o’clock mark. You should also notice the subtle date indicator at the 3 o’clock mark, the wide hour and minute hands, and the arrow-pointer seconds hand. Powering the piece is the automatic IWC Caliber 30120, which uses an ETA 2892-A2 movement as its base and has a power reserve around 42 hours.
In this area, you can still notice a few elements providing a historical link to the originals. Note the design of the hour markers, specifically how the early models used double tick marks whereas the contemporary reference follows the same aesthetic but without two separate applied indices for each hour. Also take notice of the general attributes of the lugs, strap, and dial features, AAA IWC Replica Watches all of which display commonalities between the vintage and modern versions. The lugs, while shorter in the modern watch, still maintain a slight angle when integrating with the strap. The strap itself is still available in rubber, with almost the same pattern as the original.